Research status and development trends of high-strength and tough die-cast magnesium alloys

Density of magnesium alloy is about 67% of aluminum and 23% of steel. It also has high specific stre...

News2024-11-23



N93 mobile phone battery cover injection mold design key points

N93 mobile phone battery cover product is shown in Figure 1. Maximum outer dimensions of product are...

News2024-11-23



Mold design affects quality of aluminum die castings

With development of science and technology, requirements for safety and aesthetic appearance of die-...

News2024-11-22



Seven plastic surface treatment processes you must know

Plastic surface treatment is to form a layer with some or more special properties on the surface of ...

News2024-11-22



Quick design of technical parameters for local pressurization of die casting

Die castings with complex structures and uneven wall thickness are prone to heat nodes, especially i...

News2024-11-21

Hot runner mold technology, this time it is explained clearly!

Hot runner is a method of heating to ensure that plastics in runner and gate remain molten. Hot runn...

News2024-11-21



A core-pulling quick-change guide mechanism for die-casting molds

With requirements for lightweight vehicles, engines are becoming more integrated and structures of d...

News2024-11-20



Injection molding process parameters

1. Pressure distribution during injection
2. Factors affecting injection pressure
3. Relationship be...

News2024-11-20



Mold temperature control of large integrated die-cast structural parts

Today, as energy problems and environmental pollution problems continue to intensify, development of...

News2024-11-19



Moldflow helps solve common molding defects of injection molded parts

Common problems in injection molding process
Short shot, Air entrapment, Brittleness, Burning, Flash...

News2024-11-19