Design of injection mold structure for cutting off gate aggregate by shearing

【Abstract】Structure type of injection mold and way of ejection of aggregate are different due to d...

News2021-05-23



Injection mold gate type and selection

Gate of plastic mold refers to a section of short runner connecting sub runner and cavity, which is...

News2021-05-22



Do you know 18 basic knowledge that injection molding technicians must know?

Melt usually flows from nozzle into nozzle, but in some molds, nozzle is part of mold because it ext...

News2021-05-21



Research on a new flip chip hot runner system for forming high-gloss panels

With upgrading of air-conditioning products, traditional air-conditioning panel display window with ...

News2021-05-20



Design of Injection Mould for 45°Slanting Core-pulling Slider

(Abstract) Taking oblique core-pulling mechanism in injection mold as research object, for larger o...

News2021-05-19

Application of Cylinder Floating Mandrel in Injection Mould

Box cover product shown in Figure 1 is made of PBT+GF30, with a shrinkage rate of 0.5% and its color...

News2021-05-18



Design essentials of injection mould for honeycomb drawer

Honeycomb drawer product is shown in Figure 1. Maximum size of product is 120.00 mm * 88.50 mm * 3...

News2021-05-17



Introduction of modified resin ASA

Also known as AAS resin, it is a ternary graft copolymer composed of acrylonitrile (A), styrene (S) ...

News2021-05-15



How much do you know about thread common sense?

According to tooth type, it can be divided into triangular, trapezoidal, rectangular, serrated and c...

News2021-05-14



Introduction to basic knowledge of color masterbatch (color species)

Color masterbatch is also known as color type. Color masterbatch is a new type of special colorant f...

News2021-05-13