5 points that can not be ignored for design of strong release mechanism of plastic undercut molding

In mold design, use of strong release mechanism for product undercut is also a style of plastic mo...

News2020-02-24



Production experience of two shot injection molding

Now let’s talk about experience summary in daily production process of plastic injection molding. ...

News2020-02-22



What are types of special silicone?

Special silica gel has more special functions than ordinary silica gel, such as: high temperature r...

News2020-02-21



Headphone jack connector molding design

At present, most mobile phones also retain a wired headphone jack, which is a key component of conne...

News2020-02-20



This article can solve most of your questions about internal stress of injection molding products

Plastic products tend to generate internal stress during injection molding process. If they are not ...

News2020-02-19

China reversed situation of mold industry in 10 years, Japanese media lamented that Japan’s technolo

Japan Economic News reported on 21st that Japan's mold industry has ushered in a critical moment. M...

News2020-02-18



Influencing factors and application explanation of life of aluminum die

Aluminum die casting mold is a widely used mold at present. Because of long production cycle, large...

News2020-02-17



Not only let you know good and bad of hot runner, but also let you know who is the best in hot runne

Hot runner mold is a mold that does not solidify melt in runner by using a heating device. Because ...

News2020-02-10



Common properties of plastic

Typical applications: computer and commercial machine housings, electrical equipment, lawn gardening...

News2020-02-01



Regardless of whether you are doing injection molding or molds: 18 essential basics please keep in m

Melt usually flows from nozzle into gate, but for some molds, nozzle is part of mold because it exte...

News2020-01-17