News
Design of an aluminum alloy shell die-casting mold
By analyzing structure and formability of shell parts, we focused on detailed analysis and research ...
News2024-04-15
Plastic structure design 5 —hole, thread, and insert design requirements
It is a common method to open holes in plastic parts to connect them with other parts or to increase...
News2024-04-15
Defects and Countermeasures of Low-Pressure Casting of Magnesium Alloy Shells
Magnesium alloy is widely used in the aerospace field due to its light weight and high strength. As ...
News2024-04-12
Injection Mold Gate Design Principles
General flow pattern-fountain-like laminar flow
Features of fountain flow:
1. The fastest flowing ar...
News2024-04-12
Development of multi-cavity die-casting mold for small brackets based on ProCAST software
There are various small brackets in automobile engine, which support various moving functional parts...
News2024-04-11
Plastic structural design 4 —reinforcement ribs and columns
Reinforcing ribs are an essential feature in design of plastic parts. They are used to increase stre...
News2024-04-11
Design of die-casting mold for new energy vehicle aluminum alloy motor casing based on UG and Anycas
An aluminum alloy motor shell is shown in Figure 1. Material is AlSi12(Fe), shrinkage rate is 0.55%,...
News2024-04-10
Injection molding technology: two-color injection molding application for automotive lights
Two-color injection molding is one of the more popular advanced injection molding methods currently,...
News2024-04-10
Die-casting mold design to adapt to variations in casing structure
For two similar casing die-casting parts, two mold structures and two reasonable push-out mechanisms...
News2024-04-09
Characteristics of transparent raw materials commonly used in plastics and injection molding process
Because plastic is light in weight, has good toughness and is easy to form. Due to its advantages su...
News2024-04-09