How to solve 16 faults of plasticizing unit of injection molding machine?

1, can not shoot glue
Nozzle is blocked by a foreign object. Check whether nozzle is blocked, clean ...

News2023-03-09



If parting is not good, can finished mold work?

In order to take out plastic parts and aggregate of gating system from closed mold, place insert, mo...

News2023-03-08



Design of Demoulding Structure for Combination of Lifter and Push Block

【Abstract】There are many buckles or cylinder posts in automobile plastic parts. Such plastic parts...

News2023-03-07



Relationship between injection speed segmentation and quality of injection molded products

Close relationship between injection speed and product quality makes it a key parameter of injection...

News2023-03-06



Research on Stability of V/P Switching Position Control of Injection Molding Machine

V/P switching means that during injection process, when mold cavity is about to be filled with melt,...

News2023-03-02

Influence of position of gate and gate on notebook computer shell

Main thickness of product: 1.5~2.0mm;
Product length: 327mm;
Product width: 216mm;
Product problem: ...

News2023-03-01



Warpage Analysis and Structural Optimization of Arc-shaped Base Assembly

Arc-shaped base assembly is a 1/3 ring structure, diameter of outer ring is φ125mm, diameter of inn...

News2023-02-27



Design of Injection Mold for Self-generating Exercise Bike Fork Seat

Multiple different plastic parts formed in same pair of molds are called family molds. Advantages ar...

News2023-02-24



Auto parts bottom frame injection mold design

Bottom frame products of auto parts are shown in Figure 1. Maximum dimensions of product are 147.00 ...

News2023-02-23



Incomplete cleaning of screw? See if these steps are done right!

Screw cleaning is a problem that every injection molding factory must face. Whether it is shutdown c...

News2023-02-22