Variable cooling time in injection molding

Efforts to relocate production to low-wage countries have led to increasingly urgent cost pressures ...

News2023-02-03



Roundness, cylindricity, coaxiality, concentricity... can you distinguish clearly?

In manufacturing industry, someone once estimated that there are more circular workpieces than flat ...

News2023-02-02



Design of injection mold for surface bottom shell of acoustic wave imager

See Figure 1 for bottom case of acoustic wave imager. Maximum dimensions of bottom case are 100.00 m...

News2023-01-31



Ultra-detailed cause analysis and solution of injection molding internal stress

Stress we usually refer to in injection molding refers to force on an object per unit area. It empha...

News2023-01-30



Talking about plastic molding: the essentials and problems of plastic injection molding

1 Seven Elements of Plastic Forming
A pressure B speed C time D temperature E measurement F raw mat...

News2023-01-07

Polyethylene injection molding process conditions and performance analysis of polyoxymethylene

Polyethylene injection molding process conditions
01 Barrel temperature
Barrel temperature during P...

News2023-01-05



Design of injection mold for toy car casing

As shown in Figure 1, front features of plastic part have 1 rectangular side hole, 1 deep rib, 2 sid...

News2023-01-04



Some related data for injection molding

Due to complexity of injection molding machine processing, various small problems are often encounte...

News2023-01-03



Key points for setting operating conditions at each stage in injection molding

(1) Gradually heat up from the first stage (feeding place) to third stage (before nozzle), temperatu...

News2022-12-31



How to set reasonable injection process parameters?

Debugging of injection molding machine refers to continuous adjustment of various parameters of inj...

News2022-12-30