Causes and Countermeasures for Deformation of Injection Molded Parts - 5

As mentioned before, if product structure is rigid enough to resist internal stress caused by uneven...

News2024-03-06



Causes and countermeasures for deformation of injection molded parts - 4

Characteristics of plastic raw materials have a huge impact on deformation of molded products. Diffe...

News2024-03-04



± 1 μm, what are techniques of high precision slow wire processing?

Slow wire machine is a high -precision machining machine. Advanced slow wire processing has reached...

News2024-03-01



Causes and Countermeasures of Deformation of Injection Molded Parts - 3

Countless small earthworm particles (each particle contains countless frozen and inactive earthworms...

News2024-02-29



Design of three-dimensional rotating laminated two-color injection mold for automobile water sink

Gutter is drainage system of car. Its mesh structure has function of guiding rainwater and blocking ...

News2024-02-27

Causes and Countermeasures of Deformation of Injection Molded Parts - 2

We only need to figure out what happens to these earthworms when they are injected into mold cavity ...

News2024-02-26



Causes and Countermeasures of Deformation of Injection Molded Parts- 1

For people engaged in injection mold manufacturing and injection molding, deformation of plastic par...

News2024-02-19



Key points of injection mold design for remote control face shell and bottom shell

Remote control front and bottom shell products are shown in Figure 1. Maximum outer dimensions of fa...

News2024-02-05



40% of injection molding defects are caused by water entering mold.

Pure nylon injection molded sockets are prone to defects such as bubbles, dents, seams, loose tissue...

News2024-02-01



Design points of complex injection mold for printer drainer

Printer drain product is shown in Figure 1. Maximum dimensions of product are 226.59 mm * 44.58 mm ...

News2024-01-31