3D printer SLA technology and SLS technology in-depth comparison

Nowadays, 3D printers have been developed for many years. There are more and more 3D printer technol...

News2021-10-12



Design of Multi-cavity Injection Mold for Cushion Sealing Cover

Product diagram of cushion sealing cover is shown in Figure 1. Maximum dimension is ø42.40 mm * 76...

News2021-10-11



Design of WTB Injection Mould for Commonly Used Connectors

[Abstract] Structure and technology of connector WTB are analyzed, mold design, working process, des...

News2021-10-10



How much do you know about six processes of recycled plastics

LDPE, scientific name of high-pressure polyethylene, generally refers to plastic packaging film. Suc...

News2021-10-09



Relationship between injection speed segmentation and quality of injection molded products

Close relationship between injection speed and product quality makes it a key parameter of injection...

News2021-10-08

Design of metal powder injection mould based on complex core-pulling

【Abstract】According to structural characteristics of parts and molding characteristics of "metal ...

News2021-10-06



Causes and countermeasures of mold fouling after engineering plastic injection

Mold fouling occurs during injection molding of almost all thermoplastics. When functional requireme...

News2021-10-05



Quality Analysis of Internal Thread of Injection Molded Pipe Fittings and Design of Mold Core Pullin

Internal threaded pipe fittings are one of common connection methods in plastic piping systems, thei...

News2021-10-04



LCD back shell injection mold design

Product diagram of LCD rear case is shown in Figure 1. Maximum size of product is 430.93 mm * 312.9...

News2021-09-29



Solution to warpage and deformation defects of thin-walled products

thin-walled product, deformation defects of thin-walled products, warpage and deformation defects of...

News2021-09-27