News

Design of Large-scale Inverted Laminated Injection Mold
[Abstract] Taking laminated structure design of injection mold for refrigerator heat dissipation cov...
News1362022-10-11

Design of large injection mold for playground slide
Playground slide product is shown in Figure 1. Maximum external dimension of product is 1438.89 mm *...
News1422022-10-10

An article about engineering thermoplastic elastomer TPES
Well-known engineering thermoplastic elastomer (ETES) has higher strength than rubber (generally 2-6...
News1312022-10-09

Teach you correct operation of injection molding machine
Vertical injection molding machine operation
Preparation before starting
Check whether each lubricat...
News1382022-10-08

Brief introduction to injection molding of thermosetting plastics
Thermoset injection molding utilizes a screw or a plunger to pass polymer through a heated barrel (1...
News2852022-10-07

A simple solution to deformation of expansion mold of injection mold
Before mold design, designer should fully analyze and study whether plastic product conforms to inje...
News1242022-10-06

Cleaning robot bottom shell injection mold design
Bottom case of cleaning robot is shown in Figure 1. Maximum external dimensions of product are 320.4...
News1302022-10-05

Process principle and process of mold corrosion skin texture
This process uses anti-corrosion transfer ink, screen-prints decorative patterns on decal paper, and...
News1572022-10-03

Design of Injection Mold for YD110 Server Cooling Rack
Figure 1 shows plastic part of YD110 server cooling frame. Its main body is a thin shell, inner wall...
News1582022-09-30

Common problems and solutions of modified PBT, practical!
Polybutylene terephthalate (PBT) has excellent comprehensive properties, such as high crystallinity,...
News4732022-09-29